SYSTEM DESCRIPTION 3
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
3.3.2 Transport conditions
Fig. 10: Object conveyance with minimum distance and rotation angle
Legend
1 Minimum distance between objects
2 Rotation of the objects on the conveyor belt
• Objects must pass through the measuring station separately and at a defined
minimum distance of 50 mm.
• The objects may be placed on the conveyor belt in any direction.
Fig. 11: Unable to measure objects that are touching or lying side by side
Legend
1 The objects must not be located side-by-side
*
.
2 The objects must not be touching
*
.
Otherwise the track and trace system will deliver invalid measurement results.
Transport conditions
Not allowed
To Next Page
Loading...