6 COMMISSIONING
8026364 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
Subject to change without notice
6.2.6 Saving the parameters permanently
All parameters entered in SOPAS are transmitted to and executed on the connected
SIM200-2 Prime controller with the Immediate download option. However, the data is
only saved temporarily in the SIM200-2 Prime controller.
▸
Click on the Save parameters permanently icon in the SOPAS toolbar.
The configuration is transferred to the SIM200-2 Prime controller and saved there
permanently. This configuration is loaded whenever the controller is restarted.
▸
Click on the Save project button in the project window SOPAS toolbar.
▸
Choose a directory and file name and then confirm.
The settings are saved on the computer in a configuration file with the format *.spr.
NOTE! The settings within this file can be loaded subsequently (if required) and
transmitted to the SIM200-2 Prime controller.
Saving the
configuration in the
non-volatile memory
Saving the
configuration on the
computer
To Next Page
Loading...