COMMISSIONING 6
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
▸
Double-click on the device tile.
All configurable parameters of the 2D LiDAR sensor are compiled together in a
corresponding device description for the SOPAS configuration software.
▸
Use the tabs to open the functional areas of the configuration.
6.2.5 Logging on to device
▸
In the SOPAS toolbar, click on the icon with the three dots and select Device Login.
▸
Select the Authorized client user level and enter the default password client.
Click LOGIN to confirm.
The parameters that were previously grayed out on the tabs are now accessible.
Configuration
interface
To Next Page
Loading...