SYSTEM DESCRIPTION 3
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
• In billing-related operation, the measurement results of the VMS5200 are shown on a
separate LFT display.
3.3.4 Data output
Fig. 14: Data output of the VMS4200
Legend
1
Data output via Ethernet
2
Data output via fieldbus
3
Data output via RS-232 / RS422
• The SIM2000-2 Prime controller assigns the calculated measurement results to the
respective object.
• The measurement results are issued to a higher-level system.
• The data is issued via a host telegram coordinated by the customer.
• The calculated 3D point cloud of the calculated model can also be optionally output
here.
VMS4200 data output
To Next Page
Loading...