ELECTRICAL INSTALLATION 5
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
5.7 Connection for the photoelectric retro-reflective sensor (optional)
Fig. 61: Connection for the photoelectric retro-reflective sensor (optional)
Trigger signal
Wire color Terminal Connection
Black X4 INPUT A 1 IN1+
Brown X4 INPUT A 7 24 V
Blue X4 INPUT A 8 GND ISO (X4)
Tab. 15: Connection for the photoelectric sensor trigger (optional)
• If the trigger signal comes from an external source, the switching input can be
connected to the controller in a volt-free manner.
• In this case, the DIP switch S1 must be set to GND_ISO (X4).
• The connection with terminal 7 (24 V) can be omitted.
External trigger signal
To Next Page
Loading...