Siegenia GENIUS 2.2 - Page 40


GENIUS 2.2, Electromechanical mul-point lock
02.202040/44 H39.ELEKS013EN-00
3 s
f
Hold down the buon for
approx 3 seconds to adjust the
magnec sensor.
f
An acousc signal will sound for
approx. 4 s (alternang tone).
f
Do not close the door yet.
f
A connuous tone is sounded
aer approx. 4 s.
f
Now close the door.
f
Adjustment of magnec sensor
follows. This procedure can take
a few seconds.
f
If the magnec sensor has been
successfully adjusted, the lock-
ing elements will move to the
locking posion.
f
The status LED lights up green.
Further informaon on operaon of the GENIUS 2.2 can be found in the enclosed operang instrucons.