GENIUS 2.2, Electromechanical mul-point lock
02.20206/44 H39.ELEKS013EN-00
You will need the following protecve equipment when
assembling a mul-point lock:
• Safety shoes
• Protecve gloves
• Protecve goggles
• All work on the 230 V AC mains power supply
must be carried out in compliance with the current
German VDE regulaons (e.g., VDE 0100) and any
relevant country-specic requirements.
• All-pole safety isolaon should be used when rout-
ing the network connecon cable on-site.
• Wiring the unit incorrectly can irreparably damage
its electronic components.
• If energy-carrying cables are routed in parallel to
data cables (ISDN, DSL, etc.), this could lead to inter-
ference e.g. in the speed of the data transmission.
Only use the shielded original KFV cable.
The warning notes in these instrucons
• when observed, provide protecon against potenal
personal injury and material damage,
• classify the level of danger by the signal word,
• designate the danger of personal injury via the
hazard sign,
• dene the type and source of danger,
• show measures to prevent hazards and prohibit
specic behaviour.
The warning notes are set up according to the following
principle:
SIGNAL WORD
Explanaon of the type and source of danger
• Measures for the prevenon of the danger
The hazard sign designates warning noces that warn
of personal injury.
The type and source of the hazard denes the cause of
the hazard. The potenal consequences of non-obser-
vaon of warning noces are e.g. danger to life due to
electric shock.
Under measures, acons are listed that must be carried
out for the prevenon of hazards or which are prohibit-
ed for the prevenon of a hazard.
DANGER
The signal word "Danger" designates an immediately
threatening danger. If this hazard is not prevented, it
leads to death or severe injuries.
WARNING
The signal word "Warning" designates a potenal
hazard. If this hazard is not prevented, it could lead to
death or severe injuries.
CAUTION
The signal word "Cauon" designates a potenally
hazardous situaon. If this hazardous situaon is not
prevented, it could lead to minor or moderate injuries.
NOTICE
The signal word "Noce" denes acons for the pre-
venon of material damage. The observaon of these
notes prevents damage to the components.
Informaon, advice etc.
This symbol indicates special features and designates
facts that require increased aenon.