Siegenia GENIUS 2.2 - Preventing Improper Use

7/44

GENIUS 2.2, Electromechanical mul-point lock
7/4402.2020H39.ELEKS013EN-00
 
NOTICE

The main lock of the mul-point lock could be
damaged if you drill through the door leaf in the
area of the gear box.
• Do not drill into the door leaf in the area of the gear
box.
NOTICE

The main lock of the mul-point lock could be
damaged if the square spindle of the lever handle is
knocked through the locking groove by force.
• Do not knock the square spindle of the lever handle
into the locking groove with a tool (e. g. with a
hammer) using excessive force.
NOTICE

The door leaf must not be carried using the lever
handle as a grip as this could lead to damage.
• Use suitable aids to transport the door leaf.
NOTICE

The lock can be damaged if the locking elements are
in the locking posion when the door is open.
• Bring the locking elements into the release posion
with the door open.
NOTICE

The lock could be damaged if the lever handle is
not loaded in the normal direcon of rotaon and
loads of more than 150 N are applied to the lever
handle in the direcon of acvaon or if the lock is
acvated with foreign objects.
• Only load the lever handle in the normal direcon
of rotaon and do not apply loads of more than
150 N in the direcon of acvaon and only lock the
lock or mul-point lock with the pernent key.