Siemens 3RW44 - Page 191

PROFIBUS DP communication module
9.12 Data sets (BS)
3RW44 soft starters
Manual, 03/2017, NEB535219502000/RS-AB/008
191
The following messages can be entered:
Table 9- 20 Messages in the logbook - Reading the trips
ID No.
Trips - messages
309
Contact block overload
317 Electronics supply voltage too low
319
No supply voltage
324
Temperature sensor overload
325
Temperature sensor wire break
326
Temperature sensor short-circuit
327
Thermal motor model overload
334
I
e
limit value overshot
335
I
e
limit value undershot
339
Motor stalled - switched off
341
Asymmetry tripping
343
Ground fault tripping
355
Process image error
365
Invalid parameter value
ID No. of incorrect parameter
1407
Electronics supply voltage too high
1408
No load
1409
Phase failure L1
1410
Phase failure L2
1411
Phase failure L3
1421
Impermissible I
e
/CLASS setting
1479
Phase angle control failure
1481 System voltage too high
1482
Current measuring range overshot