Siemens 3RW44 - Soft Starter for Serial Starting with 3 Parameter Sets (Deactivate Soft Stop and 3 RW44 Motor Protection)

Typical circuit diagrams
10.1 Connection examples for main and control circuits
3RW44 soft starters
Manual, 03/2017, NEB535219502000/RS-AB/008
237
10.1.15
Soft starter for serial starting with 3 parameter sets (deactivate soft stop and
3RW44 motor protection)
1)
For permissible main and control voltage values, refer to chapter Technical data of the
power unit (Page 259).
Note
In the case of increased operating sequences, the 3RW44 should be dimensioned at least
one capacity level higher than the highest connected motor output.
Note
The "Coasting down" coasting method must be set on
the 3RW44.