Siemens 3RW44 - 5 Display, Controls and Device Interfaces; Display and Controls

3RW44 soft starters
46 Manual, 03/2017, NEB535219502000/RS-AB/008
Display, controls and device interfaces
5
5.1
Display and controls
Graphic display
There is a graphic display on the front of the device from which the functions and states of
the soft starter can be read in plain text and with the help of symbols when control voltage is
applied.
① Shows the operator panel that currently
has control priority and is thus issuing the
control commands for the motor.
② Indicates the user level setting
③ Indicates the current motor status
Display with keys Customer read
only
No motor
Serial interface Customer write Startup
Control inputs Motor is running
PLC via PROFIBUS/
PROFINET
Run down
PC via bus Motor ready to
start
No control device