Centrifuge Module Interface Operating Instructions Introduction
092D0001-02 Rev. A page 19
Operations Panel Buttons
The Centrifuge module screen displays the Operations panel with access to
the following screens:
• Details screen
• Events screen
• Test List screen
• Diagnostics screen
• Settings screen
Note Based on your authorization level, you may be limited to certain
operations and features. For example, the Operator log on and password
does not allow access to the Settings and Test List screens.
Centrifuge Operations Screens
Use the Operations panel to access screens to operate the Centrifuge. For
information about system screens, see the ADVIA Automation Solutions
Operator’s Guide.
Details Screen
When you select the Centrifuge station button from the LineMaster
workspace, the Operations panel is displayed with the Details button
selected by default. The States panel shows the current state.
Figure 10: Centrifuge Station Details Screen
To Next Page
Loading...
