092D0001-02 Rev. A page 91
Appendix C: Specifications
For technical specifications on the Hettich ROTANTA 46 RSC ROBOTIC, refer
to the Hettich operating instructions included with your system.
Centrifuge Module Specifications
Table 4 lists the operating and physical specifications for the Centrifuge
Module:
Table 4: Centrifuge Module Specifications
Hettich Unit Specifications
The Hettich unit can be programmed for the following:
• Temperatures of 10 to 40C
• Speeds up to 4500 RPM
Specification Description
Operating Conditions The Centrifuge module is designed for safety
from voltage surges according to Installation
Category II and Pollution degree 2 (IEC EN
61010-1).
Use the Centrifuge module indoors only. Do not
operate the system at altitudes above 2000 m
(6000 ft).
Operating Temperature
Range
15–32°C
Humidity Relative humidity from 20–80% noncondensing
Air Supply 60–75 psi
Air Consumption < 10 L/min
Dimensions • Weight 705 kg (1550 lb)
• Width 1794 mm (70.61 inches)
• Depth 1111 mm (43.7 inches)
• Height 2121 mm (83.5 inches)
Power Requirements 208–240 VAC, 50/60 Hz, 16A MAX
Throughput • Up to 300 tubes per hour
• Up to 72 tubes per cycle
• Up to 18 tubes per cassette
To Next Page
Loading...
