Specifications Centrifuge Module Interface Operating Instructions
page 94 092D0001-02 Rev. A
Conformance
Table 7: Conformance Specifications
IEC 61010-1:2001,
CAN/CSA C22.2 No. 61010-
1:2004,
UL61010-1:2004,
EN 61010-1:2001
Safety requirements for Electrical
Equipment for Measurement, Control, and
Laboratory use, Part 1: General
Requirements
IEC 61010-2-081/ A1:2003,
CAN/CSA C22.2 No. 61010-2-
081:2004,
EN 61010-2-081/ A1:2002,
Safety requirements for Electrical
Equipment for Measurement, Control, and
Laboratory use, Part 2: Particular
requirements for automatic and semi-
automatic laboratory equipment for analysis
and other purposes
EN61326-1:2006 Electrical equipment for measurement,
control and laboratory use – EMC
requirements Part 1: General requirements
Equipment Class A, Group 1
To Next Page
Loading...
