Symbols Centrifuge Module Interface Operating Instructions
page 96 092D0001-02 Rev. A
CAUTION Do not connect external
devices to the user interface (UI) to real
time (RT) connector. Connecting
external devices can cause system
damage.
Identifies the location of the user
interface (UI) to real time (RT)
connector. This connector is for system
connections only.
Identifies the location of the small
computer system interface (SCSI)
connector. This connector is not used at
this time.
Identifies the location of the sample
transport system (STS) connector.
Indicates that the materials are recycled.
Indicates that this equipment is
classified as Waste Electrical and
Electronic Equipment under the
European WEEE Directive.
The equipment must be recycled or
disposed of in accordance with
applicable local requirements.
This symbol is used for both Warnings
and Cautions.
• A Warning indicates the risk of
personal injury or loss of life if
operating procedures and practices
are not correctly followed.
• A Caution indicates the possibility
of loss of data or damage to or
destruction of equipment if
operating procedures and practices
are not strictly observed.
Identifies a hazardous area on the
equipment.
This symbol alerts you to a potential
electrical hazard.
Symbol Description
To Next Page
Loading...
