5-28
5
Instrument Set Up
5. To edit which functions this
Operator ID can access, touch
Edit.
The Authorized Operator-
Operator access screen 1 of 2
displays.
6. To allow this operator to run
patient tests, touch Enabled.
To prevent patient tests, touch
Disabled.
7. To allow this operator to run
QC tests, touch Enabled.
To prevent QC tests, touch
Disabled.
8. Touch Next.
The Authorized Operator-
Operator access screen 2 of
2 displays.
9. To allow this operator to recall
results, touch elect Enabled.
To prevent recall results, touch
Disabled.
10. To allow this operator to set up
the instrument, touch Enabled.
To prevent instrument setup,
touch Disabled.
11.Touch Done twice.
The Authorized Operator-
Operators list screen displays.
12. Touch Exit.
13. Touch Done 3 times to return
to the Select Ready screen.
Instrument Settings
Viewing, Editing, Printing, and
Deleting Operator IDs
You can view, print, or delete the
entire operator list or edit individual
operators.
NOTE: If you delete the entire
operator list, ensure that
authorized operators is Disabled.
See Setting Operator IDs above.
To Next Page
Loading...
