Operating Manual of FC18 Controller
Page: 37/63
20. HOW TO SET TIME
Function: To set system time.
Steps:
1. Press “Menu” to browse the main menu (Fig. 20-1)
Main menu displayed.
2. Press “→” to pop out the "Tool" submenu (Fig.20-2). Select “Set Time" and
press “OK” to enter the time setting interface (Fig.20-3).
3. Press "←" to delete the previous number and enter the exact time and date
then press "OK". The change will take effect immediately.
Note: A master controller can be set as a time-based controller by FXS1800
engineering tool. The time-based controller synchronizes other slave
controller every one hour. Salve controller can not be synchronized
when system restart.
Fig.20-1
Fig.20-2
Fig.20-3
To Next Page
Loading...
Need help?
General
