Siemens FC18 - Appendix 5 Input Method

Operating Manual of FC18 Controller
Page: 62/63
APPENDIX 5 INPUT METHOD
Letter/Number input:
1. Press down letter/number key, then input content will switch between
number and letter.
2. When switched to needed content, relieve the key to complete the input of
needed letter/number.
Special character input:
1. Press down number key (1), then input content will switch among '1', '.', '+',
'*', '=', ';', '~', '(', ')', '[', ']', '{', '}', '!', ':', ‘space’, '-'.
2. When switched to needed content, relieve the key to complete the input of
needed character.