M
Michael ReynoldsSep 8, 2025
What does 'CircuitTrouble' mean on my Siemens FC901-U3?
- CCourtney HarrisonSep 9, 2025
If your Siemens Control Panel indicates circuit trouble, it means the battery charge circuit is in trouble.
What does 'CircuitTrouble' mean on my Siemens FC901-U3?
If your Siemens Control Panel indicates circuit trouble, it means the battery charge circuit is in trouble.
What does it mean if my Siemens FC901-U3 says 'Short'?
If your Siemens Control Panel indicates a short, it means the device is experiencing a short trouble.
What does it mean if my Siemens Control Panel indicates a ground fault?
If your Siemens Control Panel shows a ground fault, it indicates the device is in a ground fault condition.
What does it mean when my Siemens FC901-U3 Control Panel displays 'VoltageLow'?
If your Siemens Control Panel indicates a low voltage, it means the battery voltage is too low.
What does it mean when my Siemens Control Panel displays 'VoltageHigh'?
If your Siemens Control Panel displays a high voltage warning, it indicates that the battery voltage is too high.
What does 'Open' mean on my Siemens FC901-U3?
If your Siemens Control Panel displays 'Open', it indicates that the device is in open trouble.
What does 'AddressInvalid' mean on my Siemens Control Panel?
If your Siemens Control Panel displays 'AddressInvalid', it indicates that the address of the SLC device is invalid.
What does it mean when my Siemens Control Panel displays 'Dirty'?
If your Siemens Control Panel displays 'Dirty', it indicates that the SLC device is dirty.
What does 'FatalFault' mean on my Siemens FC901-U3 Control Panel?
If your Siemens Control Panel reports a fatal fault, it means the SLC device reported a fatal fault trouble.
What does 'TypeMismatch' mean on my Siemens Control Panel?
If your Siemens Control Panel displays 'TypeMismatch', it means the SLC device type is not consistent with the config file.
Series | FC900 |
---|---|
Protection Class | IP30 |
Type | Fire Alarm Control Panel |
Operating Temperature | 0°C to 50°C |
Supply Voltage | 230 VAC |
Quiescent Current | 150 mA |
Alarm Current | 500 mA |
Enclosure rating | Metal |
Communication interfaces | Ethernet, RS-485 |
Certifications | EN 54-2, EN 54-4 |