Inserting printing paper
127
Building Technologies A6V10210410_a_en_--
Fire Safety & Security Products 18.05.2009
27 Inserting printing paper
The printer can also be fitted the other way round, i.e. different from the position
shown below.
Opening the printer
z Push the clips slightly down and open the printer as shown in the figure.
Opening the printer
Replacing the paper roll
1. Remove the reel of the old paper roll.
2. Insert the new paper roll as shown in the figure below.
Please make sure that the side that will be unwound is at the back of the drum,
corresponding to the dashed line in the figure below.
To Next Page
Loading...
