Siemens FS720 - Pin Assignments

EVAC-NL operating unit FTO2007-N1 [NL]
86
Building Technologies A6V10210410_a_en_--
Fire Safety & Security Products 18.05.2009
X400 Connection peripheral data bus, input
X402 Connection periphery bus, output for additional EVAC
H401 … H434 LEDs for operating indication (designation on PCB)
H205 Watchdog
H201 Buzzer
S20 (1 … 6) Switch for configuration
X1 Connection for EVAC-NL connector board FTI2002-A1 (only with remote
EVAC)
18.2 Pin assignments
Wiring of integrated EVAC 10-zone display
The EVAC-NL operating unit FTO2007-N1 as 10-zone indicator is used as
standard in the operating unit of the following fire control panels:
z FC722-HA
z FC724-HA
Periphery board
FTO2007
FCM7221-H3
FTO2007
PMI & mainboard
FCM72xx
FC72x
Wiring of integrated EVAC 20-zone display