EVAC-NL operating unit FTO2007-N1 [NL]
87
Building Technologies A6V10210410_a_en_--
Fire Safety & Security Products 18.05.2009
The operating add-on FCM7221-H3 (option) is installed in the bottom part of the
fire control panel and is connected via the peripheral data bus.
Peripheryboard
FTO2007
PMI & Mainboard
FCM72xx
FTO2007
RS485
FCA2002
FTI2002
FC72x
Vsys
RS485
Vext.
FTI2002
X1
X1
X1
X1
X4
X4
FCM7221-H3
1
2
X400
X402
Wiring of the remote EVAC 20-zone indicator via the RS485 interface
1 Any housing (e.g. ECO housing)
2 Operating add-on FCM7221-H3 with 2 x EVAC-NL FTO2007-N1 (option)
The two EVAC-NL operating units FTO2007-NL must be linked via the peripheral
data bus for synchronization (X400 – X402). If the LED indicators on the two
components do not flash in synch, this indicates that they are not connected to one
another.
18.3 Indications
LED Colour Function Condition Meaning
H401 …
H434
Operation indicators See operating instructions
Off Normal condition H205 Yellow Watchdog
On Function failure of the processor
To Next Page
Loading...
