Periphery board (1-loop) FCI2001-A1
43
Building Technologies A6V10210410_a_en_--
Fire Safety & Security Products 18.05.2009
Indications of programmable inputs / outputs
LED Colour Function Condition STATUS DIRECTION
Off Normal operation H108 Yellow IO_FAULT
On I/O error (excess temperature, excess voltage, etc.)
Off I/O STATUS (push button S100) H109 Yellow IO_DIR
On I/O DIRECTION (push button S100)
Off High input (default) INPUT (default) H110 Yellow IO_1
On Low input OUTPUT
Off High input (default) INPUT (default) H111 Yellow IO_2
On Low input OUTPUT
Off High input (default) INPUT (default) H112 Yellow IO_3
On Low input OUTPUT
Off High input (default) INPUT (default) H113 Yellow IO_4
On Low input OUTPUT
C-NET indicators
LED Colour Function Condition Meaning
Off Passive (normal operation)
1 x flashing
(every 2 s)
Failsafe active (communication to PMI
interrupted)
2 x flashing quickly
(every 2 s)
Failsafe active + local alarm
1 x flashing
(every 1 s)
Failsafe active + indication (local alarm)
1 x flashing (every 1 s)
and
2 x quickly flashing
(every 2 s)
Failsafe active + local alarm + indication
H201 Yellow C-NET loop 1
(module 2)
On Startup problems C-NET module 2 (clock)
8.4 Adjustment elements
Switch Function Position Meaning
STATUS indication S100 Switchover of the indication for the I/O
LEDs (see also H109)
Switchover
DIRECTION indication
To Next Page
Loading...
