Siemens FS720 - Page 51

Periphery board (2 loops) FCI2002-A1
51
Building Technologies A6V10210410_a_en_--
Fire Safety & Security Products 18.05.2009
Indication of outputs
LED Colour Function Condition Meaning
Off Relay activated (default) H102 Yellow FUE_FAU_1
On Relay not activated
Off Active (default)
Slow Open line
Fast Short-circuit
H103 Yellow FUE_FAU_2
On Passive
Off Relay not activated (default) H104 Yellow FUE_AL_1
On Relay activated
Off Passive (default)
Slow Open line
Fast Short-circuit
H105 Yellow FUE_AL_2
On Active
Off Passive (default)
Slow Open line
Fast Short-circuit
H106 Yellow HORN_1
On Active
Indications of programmable inputs / outputs
LED Colour Function Condition STATUS DIRECTION
Off Normal operation H108 Yellow IO_FAULT
On I/O error (excess temperature, excess voltage, etc.)
Off I/O STATUS (push button S100) H109 Yellow IO_DIR
On I/O DIRECTION (push button S100)
Off High input (default) INPUT (default) H110 Yellow IO_1
On Low input OUTPUT
Off High input (default) INPUT (default) H111 Yellow IO_2
On Low input OUTPUT
Off High input (default) INPUT (default) H112 Yellow IO_3
On Low input OUTPUT
Off High input (default) INPUT (default) H113 Yellow IO_4
On Low input OUTPUT
Off High input (default) INPUT (default) H114 Yellow IO_5
On Low input OUTPUT
Off High input (default) INPUT (default) H115 Yellow IO_6
On Low input OUTPUT
Off High input (default) INPUT (default) H100 Yellow IO_7
On Low input OUTPUT
Off High input (default) INPUT (default) H101 Yellow IO_8
On Low input OUTPUT