Ex transmitter and receiver optics housings
A hybrid cable is used to connect the transmitter optics housing to the barrier box.
Connecting transmitter optics housing to barrier box
1. Cut o the tted connector from the end of the hybrid cable at the barrier side.
2. Insert the hybrid cables (one for each channel) through the openings at the top of the barrier
box. Fasten each cable with a gasket.
Electric connections
4.2Connecting the LDS 6, optics housing CD 6
LDS 6 & Optics housing CD 6 Compact Operating Instructions
Compact Operating Instructions, 12/2022, A5E03314905-AB 41
To Next Page
Loading...
