165/213
Building Technologies Basic documentation LMV37.4... CC1P7546en
HVAC Products 26 Parameter level 01.12.2009
Starting the “warm settings“
F
or A
and
or
as well as
F
and A
and
or
P
Vh
mi n
s%
Bild 118/070 7
Ignition position
P0 can only be set when
symbol ▲ or ▼ is no longer highlighted.
For fuel, keep
F depressed, for air, A , as
well as for VSD F and A
Press
or to adjust the value.
As soon as symbol ▲ or ▼ is no longer high-
lighted, the next curvepoint
P1 can be selected
with
.
F
or A
and
or
as well as
F
and A
and
or
P
Vh
mi n
s%
Bild 123/070 7
Low-flame position
P1 can only be set when
symbol ▲ or ▼ is no longer highlighted.
The value is adopted from
P0.
For fuel, keep
F depressed, for air, A , as
well as for VSD
F and A
Press
or to adjust the value.
As soon as symbol ▲ or ▼ is no longer high-
lighted, the next curvepoint
P2 can be selected
with
.
To the next curvepoint
Back to the previous
curvepoint
P
Vh
mi n
s%
Bild 124/070 7
When changing from
P1 to P2 for the first time,
curvepoints
P2…P8 automatically calculated
and saved.
CALC appears for a short moment.
To Next Page
Loading...
