Installation 5 - 11
Siemens-Elema AB Register 3 SPB7-230.033.12 Page 11 of 26 Opdimar
Solna, Sweden Rev. 01 09.02 SPS-UD Installation
4. Connect the cable to the MAMMOMAT generator connector X2 on D707,
see Fig. 10.
For MAMMOMAT with a serial number >3000, the shielding of the
cable shall be connected to the generator by means of the chas-
sie ground clamp on the rear wall of the generator, below the
D700 board. The shielding of the cable is accessible by cutting
the two cable ties and removing the protective plastic sleeve.
This is to ensure electromagnetic compatibility of the equipment.
NOTICE
OPD00157
X2
Chassie ground clamp
Fig. 10 Connection of cable to the generator
To Next Page
Loading...
