Installation 5 - 19
Siemens-Elema AB Register 3 SPB7-230.033.12 Page 19 of 26 Opdimar
Solna, Sweden Rev. 01 09.02 SPS-UD Installation
5. If the workstation table stands on an uneven floor, it can be adjusted with the
adjustable screws on the framework.
6. Place the monitor, the keyboard and the mouse on the tabletop. Make sure that all
the equipment is within the edges of the tabletop.
7. Let the cables from the monitor, the keyboard and the mouse pass through the
hole at the back of the tabletop.
8. Place the main unit to the right on its shelf (1/Fig. 20).
9. Mount the MO unit shelf close to the main unit (2/Fig. 20).
10. Place the MO unit to the right on the shelf (2/Fig. 20).
OPD00502
HEWLETT!
PACKARD!
1
2
Fig. 20 Shelves
To Next Page
Loading...
