Siemens MAMMOMAT Novation DR - Face Shield; Mechanical Checks

MAMMOMAT Novation
DR
SPB7-250.815.02 Page 4 of 12 Siemens AG
System Rev. 02 09.04 CS SD 24 Medical Solutions
5 - 4 Mechanical Checks
5. Fit the inner plastic strip (7/Fig. 3) to the front and side covers and fasten with
screws (1/Fig. 3), eight on either side.
6. Press on the outer plastic strip (8/Fig. 3).
Stand cap
1. Place the Stand cap on the top of the MAMMOMAT stand (2/Fig. 4).
Face shield 5
1. Slide the face shield (1) onto the holder for external diaphragms.Checking the
swivel arm system
Fig. 4 Stand cap
Fig. 5 Face shield
2
1