MAMMOMAT
Novation
DR
SPB7-250.815.02 Page 4 of 4 Siemens AG
System Rev. 02 09.04 CS SD 24 Medical Solutions
10 - 4 Final procedures
Warning label on control panel 10
The control panel warning label comes in eleven languages; English, German, French,
Spanish, Italian, Dutch, Danish, Norwegian, Finnish, Greek, and Swedish. The warning
labels are found in a plastic bag under thumb index 3 in the Technical Manual.
Choose the appropriate language and affix the label over the existing label on the control
panel, see Fig. 2. Be sure to position the label properly before affixing it. The label sticks
immediately.
Quality Certificate 10
• The SP Q Quality Certificate has to be filled out and signed. The form can be found in
the chapter 9 Certificates of the technical documentation binder (Appendix of 66 46 900
QZE 01S 00). It has to be sent to the address stated on the certificate only when
Installation or Start up problems occurred. Place a copy of the SP Q Quality Certificate in
the technical documentation binder.
• The Startup Protocol and the Installation Protocol remain with the system.
Warning label in English is provided on delivery.
Fig. 2 Warning label on control panel
NOTE
This X-ray unit may
be dangerous to
patient and operator
unless safe exposure
factors and operating
instructions are
observed.
WARNING
kV m A s AEC
Mo Mo W
Mo Rh Rh
Program. Auto Lim.
HD
Ñ
MAM00206
To Next Page
Loading...
