Siemens MAMMOMAT Novation DR - Phantoms; Auxiliary; Tools

Prerequisites 1 - 3
Siemens AG SPB7-250.815.02 Page 3 of 4 MAMMOMAT Novation
DR
Medical Solutions Rev. 02 09.04 CS SD 24 System
Phantoms / Auxiliary 1
Tools 1
Item Remarks
Material
Number
With
Sys-
tem
RMI 156 88 81 265 no
Three, 2 cm plexi (PMMA) 65 61 232 yes
2 mm steel plate, 30x25 cm 66 55 851 yes
2 mm steel plate, 3x10 cm 66 55 844 yes
One 0.1 mm, two 0.2 mm and one 0.5
mm sheets of aluminum 99% (1100)
alloy, 4x4 cm
88 81 273 no
Mammography line pair phantom 2-10 lp/mm 88 81 299 no
Collimator mounted plexi (4 cm) yes
Compression plate simulator yes
4.2 cm plexi Size of the detector 74 47 720 no
Ethernet cable no
Serial PC cable RS232 / Array / BRICK 66 55 745 yes
Serial PC cable RS232 / Stand 99 00 440 no
Cassette / Film 24x30 cm no
Centering cross 96 60 051 no
Tab. 2 Phantoms and auxiliaries
Item Remarks
With
Sys-
tem
Standard installation and service tools no
Torque wrench for bolting the stand/
console to the floor
no
Electrical screwdriver with adjustable
torque is recommended
no
Tab. 3 Tools