Siemens MAMMOMAT Novation DR - Page 70

MAMMOMAT Novation
DR
SPB7-250.815.02 Page 10 of 20 Siemens AG
System Rev. 02 09.04 CS SD 24 Medical Solutions
9 - 10 Image Quality
4. Select Gain Calibration. The data from the last Calibration will be displayed.
After pressing the Start button the last calibration data will no
longer be valid.
The "temperature" field in this picture shows a value of "3045",
due to a bug in the software.
The actual temperature value is "30.45".
WARNING
Fig. 10 Calibration - Enter
NOTE