8 Prerequisites
MAMMOMAT Novation DR SPB7-250.815.06.02.02 Siemens AG
12.05 CS SD 24
Page 8 of 116
Medical Solutions
Tab. 2 Phantoms and auxiliaries
Tools 0
Tab. 3 Tools
Item Remarks Material
Number
With
Sys-
tem
RMI 156 88 81 265 No
Three, 2 cm plexi (PMMA) 65 61 232 Yes
1 cm plexi (PMMA) 65 61 224 No
2 mm steel plate, 30x25 cm 66 55 851 Yes
2 mm steel plate, 3x10 cm 66 55 844 Yes
One 0.1 mm, two 0.2 mm and one
0.5 mm sheets of aluminum 99%
(1100) alloy, 4x4 cm
88 81 273 No
Mammography line pair phantom 2-10 lp/mm 88 81 299 No
Collimator mounted plexi (4 cm) Yes
Compression plate simulator Yes
4.2 cm plexi Size of the detector 74 47 720 No
Ethernet cable No
Serial PC cable RS232 / Array / BRICK 66 55 745 Yes
Serial PC cable RS232 / Stand 99 00 440 No
Cassette / Film 24x30 cm No
Centering cross 96 60 051 No
Item Remarks With
System
Standard installation and service tools No
Torque wrench for bolting the stand/con-
sole to the floor
No
Electrical screwdriver with adjustable
torque is recommended
No
To Next Page
Loading...
