13.3 Tool types
A number of tool types are available when you create a new tool. The tool type determines
which geometry data is required and how it will be computed.
Note
Turning on milling machine
If you are working on a milling/turning machine, when creating tools, turning tools are also
available in addition to drilling, milling and special tools.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Tool types
Figure 13-1 Favorites-standard selection for a milling machine
Tool management
13.3 Tool types
Milling
688 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
