21.2 Enabling a device
The available device options may be protected by a password.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Procedure
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
A list of the connected devices is displayed.
3. Press the "Enable function" softkey.
The "Enabling of the Devices Option" window opens.
4. Enter the option code and press the "OK" softkey.
A tick appears in the appropriate checkbox in the "Function" column and
the function is enabled.
Easy Extend
21.2 Enabling a device
Milling
892 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
