Siemens NXAIR - Page 131

Operating the contactor panel with panel width 435 mm
110-0134.9 / 14 NXAIR / ≤ 40 kA 131
CAUTION
Sharp edges
The metal parts of the contactor truck may have sharp edges.
Put on personal protective equipment.
Lower the ramps (1) of the panel base.
Fig. 225: Lowering the ramps
Fig. 226: Ramps in open position
Unlocking the contactor truck from the panel
Release the interlocking with the panel by turning the two locking levers at the contactor
truck to the outside.
Fig. 227: Releasing the interlocking
with the panel
Fig. 228: Contactor truck unlocked
1