Siemens NXAIR - 1 Safety Instructions

110-0134.9 / 14 NXAIR / ≤ 40 kA 3
Safety instructions
1 Safety instructions
Hazards are classified in accordance with ISO 3864-2 using the following keywords:
• DANGER, WARNING or CAUTION, in case of personal injury
• NOTICE for material damage
Hazards are classified and indicated in the Operating Instructions as follows:
DANGER
Signal word indicates an immediate and imminent hazardous situation.
If the hazard is not avoided, death or serious injury will be the consequence.
WARNING
Signal word indicates a potentially hazardous situation.
If the hazardous situation is not avoided, death or serious injury can be the
consequence.
CAUTION
Signal word indicates a potentially hazardous situation.
If the hazardous situation is not avoided, minor or moderate injury can be the
consequence.
Definitions and symbols
NOTICE
Indicates a potentially damaging situation.
If the damaging situation is not avoided, the product or something in its vicinity
may sustain damage.
INFORMATION
Provides additional information to clarify or simplify a procedure.
Observe the information.
Operation symbol:
Asks the operator to perform an operation.
Result symbol:
✓
Identifies the result of an operation.