Siemens NXAIR - Taking the Circuit-Breaker Truck out of the Panel

Operating the circuit-breaker panel
86 NXAIR / ≤ 40 kA 110-0134.9 / 14
10.22 Taking the circuit-breaker truck out of the panel
CAUTION
Injury
The mechanism inside the circuit-breaker truck can cause injuries by getting
squeezed, caught or cut.
Do not remove any parts of the covering.
Do not charge the spring energy store in the circuit-breaker.
Fig. 144: Circuit-breaker panel with high-voltage door open
Preconditions
• Circuit-breaker truck in test position
• Spring energy store in the circuit-breaker discharged
• High-voltage door open
• Low-voltage connector stowed away