Operating the circuit-breaker panel
110-0134.9 / 14 NXAIR / ≤ 40 kA 89
10.23 Inserting the circuit-breaker truck in a panel
Maloperation
The circuit-breaker truck is designed exclusively for slow and careful driving on
obstacle-free paths.
Before moving the circuit-breaker truck, check the path.
Keep the shunting area and paths free of obstacles and dry.
Remove objects such as small parts, installation material or tools from the
floor in the travel area.
Move the circuit-breaker truck only slowly and constantly.
The circuit-breaker truck is not suitable for unsteady floor, such as stairs,
deepening or floor joints.
Injury
The mechanism inside the circuit-breaker truck can cause injuries by getting
squeezed, caught or cut.
Do not remove any parts of the covering.
Do not charge the spring energy store in the circuit-breaker.
Maloperation
Risk of damaging safety-relevant parts. Operating the switchgear with a circuit-
breaker truck version that is not suitable for the corresponding panel version can
cause serious damage to the switchgear.
Do not change the mechanical coding or the coding symbols.
To Next Page
Loading...
Need help?
General
