Operating the circuit-breaker panel
88 NXAIR / ≤ 40 kA 110-0134.9 / 14
Maloperation
Protruding parts at the rear of the circuit-breaker truck can cause injuries.
Move and operate the circuit-breaker truck only at the front side.
Maloperation
The locking bracket at the circuit-breaker truck is exclusively designed for
interlocking the circuit-breaker truck with the switchgear frame.
Do not push the locking bracket downwards towards LOCK if the circuit-
breaker truck is outside the panel.
Pull the circuit-breaker truck out of the panel using the handles.
Fig. 148: Pulling out the circuit-breaker truck
If no further operation is executed: Close the high-voltage door.
The circuit-breaker truck can now be moved away from the panel.
To Next Page
Loading...
