Operating the circuit-breaker panel
110-0134.9 / 14 NXAIR / ≤ 40 kA 77
10.21 Inserting the withdrawable circuit-breaker in a panel
Maloperation
The service truck is designed exclusively for slow and careful driving on obstacle-
free paths.
Before moving the service truck, check the path.
Keep the shunting area and paths free of obstacles and dry.
Remove objects such as small parts, installation material or tools from the
floor in the travel area.
Move the service truck only slowly and constantly.
The service truck is not suitable for unsteady floor, such as stairs,
deepening or floor joints.
Injury
The mechanism inside the withdrawable circuit-breaker can cause injuries by
getting squeezed, caught or cut.
Do not remove any parts of the covering.
Do not charge the spring energy store in the circuit-breaker.
Maloperation
Risk of damaging safety-relevant parts. Operating the switchgear with a
withdrawable part version that is not suitable for the corresponding panel version
can cause serious damage to the switchgear.
Do not change the mechanical coding or the coding symbols.
To Next Page
Loading...
Need help?
General
