Siemens NXAIR - Page 228

Operating the switch-disconnector panel
228 NXAIR / ≤ 40 kA 110-0134.9 / 14
Fig. 404: High-voltage door with
actuating opening
Fig. 405: Lifting the operating slide
While keeping the operating slide lifted, insert the operating lever slightly into the actuating
opening such that the instruction label for clockwise turning direction is visible.
Fig. 406: Instruction label on operating lever
Adjust the position of the lever such that the pins on the lever are horizontal and parallel
with the openings in the feeder earthing switch operating mechanism.
Insert the operating lever in the actuating opening as far as it will go