Siemens NXAIR - Page 314

Accessing the connection compartment through the front
314 NXAIR / ≤ 40 kA 110-0134.9 / 14
Procedure
To detach the holder of the air guide, loosen the lower bolt (2) size M8, and Remove the
upper bolt (1) size M8, and store it. Proceed in the same way on the other side.
Fig. 575: Bolts for detaching the holder
Fold the air guide upwards.
Fig. 576: Folding the air guide upwards
Fig. 577: Air guide folded upwards
Remove the upper bolts size M8 from the vertical partition, and store them.
Fig. 578: 4 bolted joints on partition
1
2