Siemens NXAIR - Page 334

Accessing the connection compartment through the front
334 NXAIR / ≤ 40 kA 110-0134.9 / 14
Procedure
Remove the connecting elements from the front of the labyrinth, and store it:
• 2 nuts M8 with contact washers
Fig. 616: 2 bolted joints at front of labyrinth
Remove the connecting elements from the top side of the labyrinth, and store it:
• 4 bolts M8x16 with contact washers
Fig. 617: 4 bolted joints at top side of labyrinth
Remove the labyrinth, and store it.