Siemens NXAIR - Page 358

Accessing the connection compartment through the rear
358 NXAIR / ≤ 40 kA 110-0134.9 / 14
(3)
Sealing brackets
(4)
Vertical ledges
Fig. 659: Contactor panels with panel width 435 mm only:
Installing ledges and brackets
✓
The rear wall is installed on the connection compartment.
INFORMATION
Final procedure steps
Now the panel can be integrated into the course of operation again, for example:
De-earthing the feeder.
Racking the withdrawable part / switching-device truck to service position.
3
4