802-9081.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • Revision 11 13/293
Description
8 Examples for panel versions
8.1 Circuit-breaker panels
Fig. 3: Circuit-breaker panel (630 A)
①
Rear pressure relief duct
②
Busbar voltage transformer (option)
③
Busbar system
④
Three-position disconnector
⑤
Switchgear vessel, hermetically welded, filled with SF
6
gas, with bursting disc
⑥
Circuit-breaker with vacuum interrupters
⑦
Ring-core current transformer (option)
⑧
Cable with cable plug for outside-cone plug-in system
⑨
Voltage transformer (option)
⑩
Voltage transformer disconnector (option)
⑪
Cover to cable compartment
⑫
Capacitive voltage detecting system (busbar: left side,
cable feeder: right side)
⑬
Control board
⑭
SIPROTEC bay controller (option)
⑮
Low-voltage compartment
Fig. 4: Circuit-breaker panel (1000 A)
①
Rear pressure relief duct
②
Busbar voltage transformer (option)
③
Busbar system
④
Three-position disconnector
⑤
Switchgear vessel, hermetically welded, filled with SF
6
gas, with bursting disc
⑥
Circuit-breaker with vacuum interrupters
⑦
Ring-core current transformer (option)
⑧
Cable with cable plug for outside-cone plug-in system
⑨
Voltage transformer (option)
⑩
Voltage transformer disconnector (option)
⑪
Cover to cable compartment
⑫
Capacitive voltage detecting system (busbar: left side,
cable feeder: right side)
⑬
Control board
⑭
SIPROTEC bay controller (option)
⑮
Low-voltage compartment
To Next Page
Loading...
