Siemens NXPLUS C - Operating Disconnector Panels as of 2000 a (900 MM Panel Width)

Operation
234/293 Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
26.5 Operating disconnector panels as of 2000 A (900 mm panel width)
Disconnector panel as of 2000 A: Connecting the feeder to the busbar
1
Initial situation
2
➭ Push the interrogation lever downwards
and hold it.
3
➭ Push the control gate to the left.
4
➭ Switch the three-position disconnector to
CLOSED position (insert the operating lever and
turn 180° clockwise).
5
➭ Remove the operating lever (the
interrogation lever and the control gate
return to their initial position).