Step by Step
Making Calls – Convenience Functions
60
If You Cannot Reach a Destination ...
Call Waiting (Camp-On)
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond Æ Page 50.
Busy Override - Joining a Call in Progress
This function is only available if it has been configured
by the service technician (contact your service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
> : Select and confirm.
or
qjf Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
Camp-on
The called party can prevent automatic call
waiting Æ Page 51.
If this feature is configured (contact your service
personnel), you will hear the ring tone and the
message "Camp-on" is immediately displayed.
Override?
To Next Page
Loading...
Need help?
General