Siemens Profiset 3030 - Remote configuration

Step by step
Miscellaneous functions
100
or
qmi Enter the programming code.
p Enter your 5-digit password (the default is: 31994).
p Enter the codes and their complements according to
Programming manual.
Remote configuration
1
The remote configuration feature allows remote config-
uration of the HiPath 1100.
Using an MF Telephone
Required: The programming extension must have a con-
versation in progress with the remote programmer.
Press to access the Service menu.
Select and confirm.
or
qmme With a conversation in progress enter the programming
extension code to transfer control of the HiPath 1100 to
the remote programmer.
p w The remote programmer must now enter the system’s
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
p w To set the required configuration, proceed as if the re-
mote telephone were locally connected to the system.
If there is a DID installed
If the system is equipped with a Fax/DID module pro-
grammed as an external line DID.
qmi w Enter the code using a remote MF telephone after the
call is answered.
[1] If the system’s serial port is connected to a modem with access to
a telephony network, and the remote PC has a modem installed,
remote configuration can be carried out using the HiPath 1100 Sys-
tem Manager application. Ask your support technician how to do
this.
MORE FEATURES ?
*991=REM. ADM?