Siemens Profiset 3030 - LCR Bypass

Step by step
Functions used for making calls
38
when LCR is not available). This will alert the user to the
fact that the call is being completed by a standard carri-
er and that rates may be higher than usual.
To warn the user that a different carrier is completing
the call, the system telephone will display the new car-
rier or "EXPENSIVE CONNECTION" and a warning tone
will sound.
LCR Bypass
1
This makes it possible temporarily to deactivate the
rules of the LCR for an external call, using the carrier se-
lected by the user to make the connection.
Required: The LCR feature is available.
Select and confirm.
or
Press the "LCR Bypass" key.
or
qhi Enter the code for "LCR BYPASS".
p Enter the desired carrier code and number.
s Start conversation.
End LCR Bypass
t or Replace the handset or press the SPEAKER key
(warning)
[1] The rules of the LCR will only be ignored for the current call. If a
consultation or redialing is made, the rules of the LCR will be ana-
lyzed for this new call.
This feature may be activated by any extension.
LCR BYPASS?
LCR BYPASS